Filter
Top Products
Rev 0.0 23
INSTALLATION INSTRUCTIONS
EN
Connecting to the air gap (no waste disposal unit)
MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN
LINE AND AT LEAST 400 mm 153/4” ABOVE THE FLOOR ON WHICH
THE DISHWASHER WILL BE INSTALLED.
Connect the dishwasher drain hose (ref. A g. 5-13) to the air gap (ref. B g. 1.
5-13) using the wide spring clamp (ref. C g. 5-13); if necessary, cut the end of
the dishwasher drain hose (ref. D g. 5-13) (do not cut the corrugated section).
If the drain hose has been cut, use a 38 to 50 mm (1-1/2 to 2”) screw clamp*.
To connect the air gap (ref. B g. 5-13) to the “T” union (ref. E g. 5-13) of the 2.
drain line, use a rubber union* (ref. F g. 5-13) with spring or screw clamps*
(ref. G g. 5-13).
* Available from any plumbing stockist
Fig. 5-13
B
C
A
F
G
G
D
E