Filter
Top Products
28 Rev 0.0
INSTALLATION INSTRUCTIONS
EN
5.3.2 Procedure for mounting the door panel
Mount the door panel.
Place the template on the inner surface of the panel, centering it along the upper
side and matching up the reference locators (ref. A g. 5-19); mark the position of
the door hooks with a pencil (see g. 5-19). Remove the template and use a drill
with a suitable bit to make holes at the points marked on the panel.
A
A
Use the screwdriver to secure the door hooks with the 8 supplied screws (see g.
5-20) at the marked reference points.
Fig. 5-19
Fig. 5-20