Filter
Top Products
9-EN
7 Press 1 ( ) or 5 ( ), select the system, then
press 2 (ENT).
* 1 There is no OFF setting.
* 2 It is not possible to turn both “MID” and “WF” off.
If one is set to “OFF”, the other cannot be set to
“OFF”.
• Do not connect the tweeter (TW) to the channel
without “TW” indicated in the table above. If
connected, the speaker may be damaged.
• For SYSTEM 1, REAR TW cannot be connected.
• For SYSTEM 3, FRONT TW and REAR TW cannot
be connected.
•“SYSTEM 4” cannot be selected when only one unit
of the PXI-H990 is connected. Also, “SYSTEM 1” to
“SYSTEM 3” cannot be selected when two units of
the PXI-H990 are connected.
Next make the speaker settings.
8 Press 1 ( ) or 5 ( ), select “CH SELECT
[Channel Select]”, then press 2 (ENT).
9 Press 1 ( ) or 5 ( ), select the speaker that is
not connected, then press 2 (ENT).
F TW L
F TW R
F WF L*1
F WF R*1
REAR L
REAR R
FRNT C
SUBW.
CH-1
CH-2
CH-3
CH-4
CH-5
CH-6
CH-7
CH-8
SYSTEM 1
R TW L
R TW R
R WF L
R WF R
R TW C
R WF C
SUBW. 1
SUBW. 2
SYSTEM 4 (REAR)
F TW L
F TW R
F MID L*2
F MID R*2
F WF L*2
F WF R*2
SUBW. 1
SUBW. 2
F TW L
F TW R
F MID L*2
F MID R*2
F WF L*2
F WF R*2
F TW C
F WF C
SYSTEM 2
SYSTEM 4 (FRONT)
FRNT L*1
FRNT R*1
FRNT C
SUBW. 1
REAR L
REAR R
REAR C
SUBW. 2
SYSTEM 3
When one PXI-H990 is connected
When two PXI-H990 are connected
Continued
SYSTEM SEL
SYSTEM
1
Displays the
currently set
item.
Select a speaker that is
not connected.
SYSTEM SEL
System 1
System 2
System 3
System 4