Filter
Top Products
68-EN
Using the multi-channel function
9 Press 1 ( ) or 5 ( ), adjust the output level,
then press 2 (ENT).
The level can be adjusted in five steps: –6, –3,
0, +3 and +6. The higher the level, the more
bass is output from the rear speakers. (The
effect differs according to the software (DVD,
etc.).)
10 Once the settings are completed, press and
hold F
• SETUP for at least 3 seconds.
• Press 6 (RTN) or RETURN on the remote control in
the setting mode to return to the previous item.
Supplement
See page 89 for supplementary information.
Mixing bass sound to the rear channel (REAR MIX) (continued)
REAR MIX
LEVEL 0dB
REAR MIX
Rear Mix ON
Level 0dB