Filter
Top Products
56-EN
Using the multi-channel function
10
To adjust another speaker, repeat steps 6 to
9.
Cut-off frequency setting
Set the cut-off frequency to restrict the
playback when the speaker settings are set to
“SMALL”. Perform this setting after selecting
the speaker setting of every speaker.
1) On the mode Dolby SP, press 1 (
) or
5 (
), select “CUTOFF [Cutoff]”, then press
2 (ENT).
2) Press 2 (ENT), press 1 (
) or 5 ( ), select
the cutoff frequency, then press 6 (RTN).
Settable frequencies
80Hz/100Hz/120Hz/160Hz/200Hz
11
Once the settings are completed, press and
hold F
• SETUP for at least 3 seconds.
• Press 6 (RTN) or RETURN on the remote control in
the setting mode to return to the previous item.
Speaker setup (Dolby SP) (continued)
Supplement
See page 88 for supplementary information.