Filter
Top Products
64-EN
Using the multi-channel function
3 Press 1 ( ) or 5 ( ), select “AP SETUP”, then
press 2 (ENT).
4 Press 1 ( ) or 5 ( ), select “MULTI.CH.MGR
[Multi Channel Manager]”, then press
2 (ENT).
5 Press 1 ( ) or 5 ( ), select “C.BASS SPLIT
[Center Bass Split]”, then press 2 (ENT).
6 Press 1 ( ) or 5 ( ), select “MODE ON/OFF
[Center Bass Split ON/OFF]”.
7
When OFF, press 1 ( ) after pressing
2 (ENT) to switch ON.
To switch from ON to OFF, press 5 (
) after
pressing 2 (ENT).
When ON is set, the audio signal from the
front L/R can be mixed with the center audio
signal (low range).
Mixing the Bass Sound of the Center Channel with the Sound of the Front
Left and Right Channels (C.BASS SPLIT) (continued)