Filter
Top Products
58-EN
Using the multi-channel function
3 Press 1 ( ) or 5 ( ), select “AP SETUP”, then
press 2 (ENT).
4 Press 1 ( ) or 5 ( ), select “MULTI.CH.MGR
[Multi Channel Manager]”, then press
2 (ENT).
5 Press 1 ( ) or 5 ( ), select “OUTPUT LEVEL
[Output Level]”, then press 2 (ENT).
6 Press 1 ( ) or 5 ( ), select “CH SELECT
[Channel Select]”, then press 2 (ENT).
7
Press 1 ( ) or 5 ( ), select the speaker to be
adjusted, then press 2 (ENT).
When a speaker is selected, a test tone is
produced from that speaker.
LEFT CENTER RIGHT R SURROUND
L SURROUND B SURROUND
Adjusting the speaker levels (OUTPUT LEVEL) (continued)
CH SELECT
Left
Center
Right
Right Surround
Back Surround
Left Surround