Filter
Top Products
CONTROL OPERATION
12.
PRESS AND RELEASE O
N
/O
FF
KEY.
•
The green indicator light on the
O
N
/O
FF
key will illuminate.
• The oven will beep for one second and
will begin operating in the hold mode.
• The amber hold indicator will illuminate.
• The previously set hold temperature will
be displayed.
PRESS COOK KEY TO PREHEAT
• The green indicator light on the COOK
Key will illuminate.
• Last set cooking temperature
will be displayed.
➥ To change the cook temperature, press
the Up ▲ or Down ▼ Arrow key.
• The green indicator light on the Time Key
and on the Probe Key alternately flash.
PRESS PROBE KEY
• The green indicator light on the PROBE
Key will illuminate.
• Last set internal product temperature
is displayed.
➥ To change the internal product
temperature, press the Up ▲ or
Down ▼ Arrow key.
• The green indicator light on the Probe
Key will illuminate.
• Halo Heat and Pre-Heat indicator
will illuminate.
➥ The oven is automatically programmed
to preheat to the cook temperature.
• The oven will beep when preheated and
the preheat indicator light will go out.
• Both the Ready and Start indicator
lights will flash.
➥ The set cook temperature will be
maintained by the oven and will
appear in the display while in the
ready/start mode.
PRESS HOLD KEY
➥ To change the hold temperature, press
the Up ▲ or Down ▼ Arrow key.
NOTE: If the oven is being used for hot
food holding only, adjust the set
holding temperature. Do not
press
the COOK, TIME, or PROBE keys.
LOAD THE FOOD INSIDE OVEN. REMOVE
PROBE FROM ITS BRACKET, WIPE THE
PROBE TIP WITH A DISPOSABLE ALCOHOL
PAD AND INSERT PROBE PROPERLY INTO
THE PRODUCT. CLOSE THE OVEN DOOR.
NOTE: The oven will beep 3 times every
25 seconds until the oven is loaded
and the Start Key pressed.
BEFORE PRESSING THE START KEY:
To prevent a false probe temperature reading,
wait for 60 seconds after inserting the probe
into the product to allow the preheated oven
probe temperature to decrease to the internal
temperature of product.
AFTER 60 SECONDS
PRESS AND RELEASE START KEY.
• The oven will beep.
• The green indicators for power, cook,
probe, and start will illuminate.
• The display will alternate between
showing the set cook temperature and the
elapsed time.
COOK
• The oven will beep when the set probe temperature
has been reached.
• The green indicator for cook will remain illuminated.
• The display will alternate between showing the set
hold temperature and the amount of time the
product has remained in the holding mode.
HOLD
• The Ready indicator light will illuminate after 2
hours in the hold mode.
NOTE: The ready indicator does not
necessarily indicate a product-ready
state. For best results, the product
must remain in the oven at the set
holding temperature for the minimum
number of hours indicated in the
individual cooking instructions.
• The oven will remain operating in the hold mode
until the control ON/OFF Key is pressed.
COOK BY PROB E: