Filter
Top Products
9
Place Oven in Wall
This procedure should be performed by 2 people.
1. Seal Openings in wall behind the oven or on floor
under oven. Holes must be sealed before sliding oven
into position.
2. Lift wall oven and slide into cutout.
3. Secure wall oven to cabinet with 4 screws.
Place Oven in Wall
Removal and Reinstallation of Oven
1. Disconnect power to oven at circuit breaker or fuse
panel.
2. Remove screws securing oven to wall.
3. Remove oven and place oven aside.
4. Disconnect electrical conduit.
5. To reinstall oven, follow instructions in
Installation
section of this manual.
Tilting Control Panel
Control panel can be adjusted to tilt from 0° to 12° to
make more visible.
1. Loosen screws on top, and sides of control panel and
pivot screw on bottom, sides of control panel before
installing oven, or while oven partially pulled from
opening.
2. Adjust control panel to desired angle and retighten
screws.
Loosen screw
0° tilt
12° tilt
Pivot screw
Tilt Control Panel