17
Delayed Self-clean Cycle
Self-clean feature uses high oven temperature to clean
oven interior. Set oven to begin and end cleaning at later
time using. Range control calculates back from end time
to determine starting time.
1. Prepare oven for self-cleaning.
2. Press CLEAN pad.
• “CLEAN”, “TIME”, and “— — — —” display.
3. Press or pad until desired amount of cleaning
time is displayed.
• “3:00” displays when or is pressed.
• Increase or decrease cleaning time in 5 minute
increments.
• Clean can be set from 2 to 4 hours. Minimum
recommended cleaning time is 3 hours.
4. Press STOP TIME pad.
5. Press or pad until desired stopping time
appears in display.
• Starting time is automatically calculated based on
amount of cleaning time and stop time.
• “DELAY”, “CLEAN, “STOP”, “TIME”, “CLEAN”, and
“LOCK” display. “LOCK” flashes in display when
automatic door latch is locking.
• To view remaining cleaning time, press and hold
CLEAN pad.
• To view calculated stop time, press and hold STOP
TIME pad.
6. Press OVEN CANCEL pad when finished.
• When oven has cooled to a safe temperature, door
latch opens and “LOCK” light flashes. When oven
has cooled enough to open door “LOCK” light no
longer displays and door can be opened.
Interrupt Self-Clean Cycle
1. Press OVEN CANCEL pad.
2. When oven has cooled to a safe temperature, door
will unlock and can be opened.
Child Lock Out
This feature disables oven control. Surface elements will
heat when child lock out is on.
1. Press and hold BAKE and CLOCK pad for
approximately 5 seconds.
• “OFF” displays.
2. Repeat step 1 to cancel child lock.