Filter
Top Products
AP20BC175-2 Manual
13
KEYBOARD KEYS
ON/OFF & START/STOP CYCLE KEYS
ON/OFF
SOFT CYCLE
START/STOP
HARD CYCLE
SHOCK CYCLE
PROGRAMMING KEYS
AUTOMATIC CYCLE
UP
MANUAL CYCLE
DOWN
UV LIGHT CYCLE
SELECT
DEFROST CYCLE
ENTER
PRINT
HEAT PROBE CYCLE
KEY COMBINATIONS
¾ Initial Programming state – to initially set the device
o With the display reading "OFF", press and hold
(“START/STOP”) for 5 seconds
¾ Cycles programming state – to initially set the cycles
o With the display reading "OFF", press
(“ENTER”) for 1 second
¾ Recipe name programming state – to enter recipe names
o With the display reading "OFF", press
(“A”) for 10 seconds
¾ Load default values state – to load the standard parameters
o With the display reading "OFF", press
(”UP”) for 10 seconds
¾ Clear events memory state – to clear obsolete data
o With the display reading "OFF", press
+ (”UP”+”DOWN”) for 10 seconds
¾ Ready To Go state – in order to start a cycle
O If the controller is not "OFF", press
“ON/OFF” once.