Filter
Top Products
AP20BC175-2 Manual
24
The display will show briefly:
Then the display will show:
STARTING CYCLE . . .
alternating with
00:00
Will count up
The AUTOMATIC mode uses both the food probes and air probe temperatures to control the
cycle. When all the food temperatures have reached the final setting of 40
o
F, the unit wi
automatically go into holding mode and a beep will sound for 5 seconds. The elapsed time an
food temperature readouts will blink
03.07.2006 10:28 AM
AIR 1 75°F
00:00
R / CHICKEN 140°F
Y / ROAST BEEF 143°F
B / CHICKEN 141°F
G / ROAST BEEF 142°F
ll
d
.
The display will show:
alternating with
01:29 Blinks
40°F
is alternating
with
Ready
The operator can now end this cycle by pressing the ("START/ STOP") button.
The display will show briefly:
Then the display will show:
03.07.2006 11:57 AM
AIR 1 34°F
01:29
R / CHICKEN 40°F
Y / ROAST BEEF 40°F
B / CHICKEN 40°F
G / ROAST BEEF 40°F
STOPPING CYCLE . . .
OPERATING MODE
CHOOSE
OPERATING CYCLE
2. MANUAL MODE - SOFT CHILL
F
INSTEAD OF AUTOMATIC you wish to select a MANUAL cycle, perform steps 1.a, 1.b, 1.c, 1.d
1.e, 1f and 1.g (above), except in step 1.c press button
,
instead of button . The
LED for "MANUAL" will then be steady "ON". The readouts in those steps will be the same as
before.
NOTE: Cycle time can be changed only in Cycle Programming mode. To change the
programmed cycle time for any cycle see the instructions on Pages 17 to 22.
h. Press the ("START/STOP") button to start the cycle.