Filter
Top Products
AP20BC175-2 Manual
22
The display will show:
NOTE: PROGRAMMING FOR "DEFROST" WILL BE THE SAME IN MANUAL MODE AS IT IS
IN AUTOMATIC MODE (see pages 19-20
PARAM. PROGRAMMING
MANUAL HARD CYCLE
PROGRAMMING COMPLETE
).
3. RECIPE NAME PROGRAMMING
a. With the display reading "OFF", press the
button and hold it for 10 seconds.
b. Enter your password (see page 14), then press
.
c. Press or to change to the desired recipe
number (from 1 to 150), then press
which will
move you to the "NAME" line.
1 Blinks
d. Using or type the letters or numbers
required, then press
. To confirm the recipe
and go to the next one press
.
OFF
RECIPES PROGRAMMING
ENTER PASSWORD
***
ENTER RECIPE NUMBER
1
ENTER RECIPE NAME
f
a mistake is made in writing a recipe, use to go to
the desired location and correct it using
or
. There is a blank space after number 9. It can be
used to add a space or delete a letter. Press
when the recipe is corrected.
To finish the recipe name programming press
(“ON/OFF”).
_ Blinks
ENTER RECIPE NUMBER
1
ENTER RECIPE NAME
CHICKEN_