Filter
Top Products
AP20BC175-2 Manual
30
C
last chiller, it is necessary that the condenser be kept
lean so that air can circulate around it freely and come into contact with the whole of its surface.
OTE: If additional refrigerant should be needed, be certain to use the
ct e an mount as shown on the nameplate.
IRING DIAGRAMS
LEANING THE CONDENSER
For correct and efficient operation of the b
c
This operation (to be
Fig. 1
OMPARTMENT
CLEANING THE STORAGE C
N
corre typ d a
W
performed every 30 days,
ished
)
e com-
g the taste
l
eaning the
max.) can be accompl
using a brush (non-metallic
to remove all the dust and
dirt from the condenser fins.
Remove the finned grid to
gain access to the
condenser.
Clean the inside of the storag
partment daily to avoid alterin
and aroma of the food.
Clean the inside, the grid supports and
the grids with a non-corrosive detergent
and then rinse thoroughly.
The storage compartment and its interna
components have been designed to aid
all cleaning operations.
Clean the outside surfaces regularly with
a detergent for stainless steel and dry
using a soft cloth.
Always defrost the unit (see manual).
DO NOT USE ABRASIVES, SOLVENTS
OR GLASS WOOL (Fig. 3).
Avoid using sharp implements and
brasives, especially when cla
evaporator (Fig. 2).
Fig. 3
Fig.2