Filter
Top Products
AP20BC175-2 Manual
21
MANUAL HARD CYCLE PARAMETERS PROGRAMMING
A
fter about 2 seconds the display will automatically
change to:
The LED for "M" will be "ON".
The LED'S for cycles will be blinking.
aa. Press the
button. The LED for "HARD" will
be steady "ON".
bb. To change the temperature, press or
then press
.
10 Blinks
cc. To change the temperature, press or
then press
.
20 Blinks
dd. To change the time, press or then
press
.
01:00 Blinks
ee. To change the temperature, press or
then press
.
28 Blinks
ff. To change the temperature, press or
then press
.
35 Blinks
gg. To change the time, press or then
press
.
01:00 Blinks
hh. To change the temperature, press or
then press
.
35 Blinks
ii. To change the temperature, press or
then press
.
42 Blinks
PARAM. PROGRAMMING
MANUAL MODE
CHOOSE
PROGRAMMING CYCLE
PARAM. PROGRAMMING
MANUAL HARD CYCLE
LOW AIR TEMP PART 1
10 °F
PARAM. PROGRAMMING
MANUAL HARD CYCLE
HIGH AIR TEMP PART 1
20 °F
PARAM. PROGRAMMING
MANUAL HARD CYCLE
TIME 1
H 01:00 MIN
PARAM. PROGRAMMING
MANUAL HARD CYCLE
LOW AIR TEMP PART 2
28 °F
PARAM. PROGRAMMING
MANUAL HARD CYCLE
HIGH AIR TEMP PART 2
35 °F
PARAM. PROGRAMMING
MANUAL HARD CYCLE
TIME 2
H 01:00 MIN
PARAM. PROGRAMMING
MANUAL HARD CYCLE
HOLDING LOW TEMP.
35 °F
PARAM. PROGRAMMING
MANUAL HARD CYCLE
HOLDING HIGH TEMP.
42 °F