Filter
Top Products
5
Figure 2. Fryer Site Installation Requirements
Install the fryer in accordance with the preceding
Code Requirements, as well as the following
Installation Requirements.
1. DO NOT install this fryer in a mobile home,
trailer, or recreational vehicle.
2. Install this fryer in a location that allows it to be
moved away from other adjacent appliances
for cleaning and maintenance.
NOTE: If the fryer is installed among
a row of appliances where
its only convenient movement is for-
ward, sufficient room must be avail-
able in front to permit its separation
from adjacent appliances for cleaning
and maintenance.
INSTINST
INSTINST
INST
ALLAALLA
ALLAALLA
ALLA
TION REQTION REQ
TION REQTION REQ
TION REQ
UIREMENTSUIREMENTS
UIREMENTSUIREMENTS
UIREMENTS
3. Confirm that the air from the ventilation hood
flowing near the fryer after installation is NOT
blowing on the rear of the fryer, to prevent
affecting the burner flames and possibly causing
control damage.
!
CACA
CACA
CA
UTION:UTION:
UTION:UTION:
UTION: Hood make-up air
MUST NOT flow in a manner that
restricts or impedes the natural flow
of combustion or ventilation air.
2. Turn the screw-type leg adjustment ends as
necessary to level the fryer, until no tipping,
rocking, or wobbling is evident.
LEG LEVELING INSTRUCTIONS
1. Move the fryer to its desired location.
WARNING
The fryer MUST NOT tip, rock or wob-
ble, to avoid splashing or spilling its HOT
frying fat contents during operation.