Filter
Top Products
3
FRYER GAS SUPPLY SPECIFICATIONS
Please make sure that your desired fryer location has gas
supply factors that are suitable for this product:
Gas Supply Inlet Pipe must be ½“ standard gas
line. The gas supply inlet line should be as straight
as possible (fewest bends or elbows) to obtain the
highest available gas pressure at the fryer. Locate
this inlet line horizontally at the center of the
desired fryer location, approximately 8¼“ above
the floor.
1. Carefully examine the shipping carton for
external damage. When damage is noted, notify
the delivery carrier immediately. Save all packing
materials for damage claim examination.
2. If no external damage is noted, remove the
shipping carton from the fryer and examine the
SHIPPING CONTAINER INSPECTION
* - Rating is based on sea level operation. Reduce rating 4% for each 1000 feet above sea level.
** - “W.C. = Inches, Water Column.
*** - Measure Supply Pressure when all other gas-powered equipment is operating.
fryer carefully for damage. Place the fryer in a
safe location, if damage is noted, so that the freight
damage claims adjuster can examine the fryer.
3. Save the shipping container for use during leg/
caster installation. Refer to the Installation Instruc-
tions for that procedure.
Standard Accessories furnished in the shipping
carton for this fryer include:
2 Fryer Baskets 1 Screen
4 Adjustable Legs 1 Drain Valve Extension
1 Basket Hanger 1 Flue Deflector
SUPPLY PRESSURE ***
Natural Gas Propane
3½“ W.C. **
10“ W.C.
6“ W.C., minimum 11“ W.C., minimum
INPUT REQUIRED:
90,000 BTU/Hr *
MANIFOLD PRESSURE
NOTE: Using a flexible inlet line permits varia-
tion in the gas supply line location, both horizontally
and vertically.
Anets fryers are only for use with the type of gas
specified on the spec plate. If a fryer requires
modification to use a gas other than that which is
identified on the fryer spec plate, contact your
Anets representative or call (800) 837-2638.
Model
Features
14VF
Plain Steel Fryer Kettle
Model Features
Stainless Steel Fryer Kettle
Optional Accessories available for this fryer
include:
Single or Triple Fryer Baskets
1 Set (4) of Casters
14VFS
Models Covered By This Manual