Filter
Top Products
25
Basket lowers and
raises, repeatedly.
1. Lifting mechanism microswitch is improp-
erly positioned.
1. Position the microswitch
properly.
FRFR
FRFR
FR
YER YER
YER YER
YER
TRTR
TRTR
TR
OUBLESHOOOUBLESHOO
OUBLESHOOOUBLESHOO
OUBLESHOO
TING GUIDE TING GUIDE
TING GUIDE TING GUIDE
TING GUIDE
(Continued)
PROBLEM CAUSE REMEDY
Basket does not raise,
after the timer control
knob reaches a timer
value of 0 (zero).
1. Lifting mechanism or motor has failed.
(Continued)
2. Microswitch has failed.
3. Timer has failed.
1. (Continued)
If the motor operates, but the
motor shaft is not turning, the
gear inside the lift motor has
failed and the lift motor must be
replaced.
If the motor does not operate,
check for 120-volt power
between the motor’s terminals.
If 120-volt power is present
between the motor terminals,
yet the motor does not operate,
the motor has failed and must
be replaced.
If no 120-volt power is present
between the motor terminals,
the microswitch or timer has
failed and must be replaced.
Refer to the following
“Causes” 2 and 3.
2. Check for 120-volt power by
measuring between the “C”
terminal (white wire) and the
“NO” terminal (left motor:
black wire; right motor: brown
wire) of the microswitch. If
120-volt power is present
between these respective ter-
minals but the motor does not
operate, the microswitch has
failed and must be replaced.
3. If no 120-volt power is present
between the microswitch ter-
minals “C” and “NO”, the
timer has failed and must be
replaced.
Basket raises, after the
timer control knob
reaches a timer value
of 0 (zero), but then
sinks back into the
kettle.
1. Lift motor has failed. 1. Replace the lift motor.