Filter
Top Products
11
Installation
This appliance must be installed in
accordance with the regulations in
force, and only in a well ventilated
space. Read the instructions before
using or installing this appliance.
This appliance will be factory set for
use on either natural gas only, or LPG
only. If the appliance requires conver-
sion from natural gas to LPG, then the
conversion kit, part number 0130145
00, can be ordered from the Customer
Care Centre helpline given at the back
of this book.
Regulations & Standards
Prior to installation, ensure that the local
distribution condition (nature of the gas
and gas pressure) and adjustment of
the appliance are compatible.
The adjustment conditions for this
appliance are stated on the data
badge.
This appliance is not connected to a
combustion products evacuation device.
It shall be installed and connected in
accordance with current installation
regulations. Particular attention shall
be given to the relevant requirements
regarding ventilation.
The appliance must be installed, con-
verted to LPG (where necessary) and
serviced by a competent person to
ensure that the installation is in accor-
dance with “The Gas Safety
(Installation & Use) Regulations”, & the
“The Gas Safety (Installation & Use)
(Amendment) Regulations ”.
Failure to comply with these
Regulations is a criminal
offence.
Where regulations or standards have
been revised since this handbook was
printed, always use the latest edition.
All gas installation, servicing and
repair work must be in accordance
with local standards and regulations.