Filter
Top Products
Technical DataThis information is
for the following appliances:
Belling 60T side control & Belling
60T/70T front control NG & LPG
Data badgeUnderside of the hob
base
Electrical supply
220-240V ~ 50Hz 1W
Ignition
Mains repetitive ignition.
Gas connectionThe inlet connection
is at the rear right-hand side -
ISO7 - Rp1/2” (1/2” BSP)
Appliance class
Class 3 Built-In Hotplate
Gas category
Natural Gas II2H3+
LPG only I3+
The adjustment conditions for this
appliance are stated on the data
badge.
This appliance is factory set for either
natural gas only or LPG only. If you
wish to convert this hob from natural
gas to LPG, a conversion kit -part no
013014500 - can be ordered from the
Customer Care helpline.
Gas pressure settings
G20 Natural gas @ 20 mbar
G31 Propane gas @ 37 mbar
G30 Butane gas @ 28 - 30 mbar
Countries of destination
(GB) Great Britain, (IE) Ireland
The Gas Consumer Council (GCC) is
an independent organisation which
protects the interests of gas users. If
you need advice, you will find the tele-
phone number in your local telephone
directory under gas.
20
Burner Natural Gas LP Gas Bypass
kW Injector kW Injector Grammes per hour screw
60T side control- marking marking Butane Propane sizes
Back LH 2.0kW 104 2.0kW 70 145g/h 143g/h 32
Back RH 2.0kW 104 2.0kW 70 145g/h 143g/h 32
Front LH 3.0kW 129 3.0kW 87 218g/h 215g/h 40
Front RH 1.0kW 77 1.0kW 50 73g/h 72g/h 27
60T/70T front control-
Back LH 2.0kW 104 2.0kW 70 145g/h 143g/h 32
Back RH 3.0kW 129 3.0kW 87 218g/h 215g/h 40
Wok 3.5kW 121 & 63 3.5kW 87 & 35 254g/h 250g/h 68
Front RH 2.0kW 104 2.0kW 70 145g/h 143g/h 32
Front LH 1.0kW 77 1.0kW 50 73g/h 72g/h 27
Total Heat Input ∑Qn
60T 8.0kW 8.0kW 582g/h 572g/h
70T 11.5kW - 11.5kW - 836g/h 822g/h -