Filter
Top Products
Programmer / Clock
21
Programmer / Clock
7
8
9
10
11
12
Fully automatic cooking
(example)
This programming method is best suit-
ed for when a delayed start time is
required. Unlike the semi automatic
methods this requires both the dura-
tion and the end time to be entered.
The timer will work out the start time
and begin cooking.
◆ Press the function button twice to
select the length of time your food will
need. (7)
◆ The ‘A’ on the left hand side will
flash and the ‘dur’ message will flash
up. (8)
◆ Using the Up and Down buttons set
the time you require within 5 seconds
of the ‘dur’ message. (9)
◆ Press the function button three times
until the ‘A’ flashes again and the
‘End’ messages appears. (10) &
(11)
◆ Using the Up and Down buttons, set
the time you would like the oven to
switch off. (12)
◆ Set the temperature of the oven and
place the food inside.
While the automatic function is run-
ning, the ‘A’ will appear statically on
the display, with the time.
Try to keep the end time as close to
when you expect to return, this will
prevent cooked food from being left
standing in a warm oven.
The timer will calculate the appropri-
ate start time.
To switch off the alarm, press any but-
tom