Filter
Top Products
Opera tion
9
Solid State Digital Control
OVEN CONTROLS
1. POWER ON/OFF - controls the operation of
the oven. When lit the power to the unit is on.
If the switch is not lit, the power to the unit is
off.
2. DISPLAY --- displays time, temperature and
other information rela ted to oven function.
Time is displayed in minutes and seconds and
counts down.
3. START/STOP KEY --- starts or stops the se-
lected product key program.
4. PRODUCT KEYS (1 -6) --- associates a time
and temperature with a specific product for
each key.
5. PROGRAM KEY --- accesses the program
mode to set or change the time or temperature
of a produ ct key.
6. HEAT LIGHT --- indicates t hat the elements are
opera ting.
DISPLAY MESSAGES
Indicates th e oven is heating to, or cycling
attheidletemperature.(Temperaturethe
oven maintains wh en not in use).
Indicates the oven temperature is too high
for the selected product recipe. Wait until
is displayed.
Indicates the oven temperature is too low
for the selected product recipe. Wait until
is displayed.
Indicates t he oven has reached the se-
lected recipe temperature. Ready for prod -
uct load.
Indicates the number of pans of the same
product in one load.
Indicates the timer has counted down to
00:00 and the product is done.
Indicates the control is ready to accept the
code and enter the program mode.
Indicates the control has entered the pro-
gram mode.
Indicate s the cook temperat ure for a prod-
uct key can be p rogrammed.
Indicates the cook time for a single pan can
be programmed.
Indicates the cook time for two pans can be
programmed.
Indicates the cook time for three pans can
be programmed.
Indicates an open or shorted probe.
1 23 5
4
6
Figure 5