Filter
Top Products
Installation
5
Oven Assembly
LEG A TT ACHMENT
NOTE: Before operating the KCO-25E, the unit
must be mounted on the legs provided.
1. Tilt the oven onto its back.
2. Screw 4” legs into four holes located near
oven corners.
3. Use a tool to tighten the hex nut at the top of
each leg.
4. Lift oven forward onto legs.
Figure 2
OVEN LEVELING
After t he oven is mounted on the legs it should be
levele d by sc rewing the adj ustable leg feet in or
out as necessary. Check with a spirit level placed
on the top of the oven.
DOUBLE STACKING
1. Mount the lower section on legs as directed.
2. Set the upp er section on the lower section.
3. Remove the tw o stacking straps from the bot-
tom unit.
4. Remove the bottom left and right screws from
the upper section.
5. Re-attach the two stacking straps w ith the
screws removed in Steps 3 and 4.
Stacking
Straps
Figure 3