Filter
Top Products
Operation
16
Blodgett IQ2T Control
OVEN OPERATION
Oven Startup:
1. Toggle the PO WER SWIT CH (1) to ON.The
oven preheats to the lowest programmed first
stage temperature. The LEDS (16) for all prod-
ucts with the same first stage temperature light.
While the unit preheats the TOP DISPLAY (2)
gives the set temperature. The BOT TOM DIS-
PLA Y (4) reads Lo iftheovenismorethan10_
below setpoint. When the oven reaches ¦10_
of the preheat temperature an alarm sounds
and the bottom display reads Ready.
Single Product Cooking Procedure:
NOTE: If the led next to the desired product key is
lit skip step 1.
1. Press the desired PRO DUCT KEY (17). The
oven preheats to the first stage temperature for
the selected p roduct. When the oven reaches
¦10_ o f the preheat temperature an alarm
sounds and the botto m di spl ay reads Re ady.
2. Load the product into the oven. Press the de -
sired PRODUCT KEY (17).
If the shelf timing function is toggled on for that
product key, t he top display reads SHLF and
the bottom display reads t he programmed
product’s time. Press a SHELF KEY (18) to as-
sign the product to that shelf and start the
cook cycle. The top display reads SHLF,the
bottom display gives the shelf #. Within five
seconds, the top display reads SH-1,thebot-
tom display gives the remaining cook time.
If the shelf timing function is toggled off for that
product key, pressing the product key will
start the cook cycle. The TOP DISPLAY (2)
r e a ds --- --- --- --- . T h e B OT T O M D I S P LAY ( 4 )
counts down the cook time in minutes: s ec-
onds.
NOTE: If the selected product has a cook time
of greater than 59:59 the top display
r e ad s H r --- --- f o r t h e to t al n u m b er o f
hours. The bottom display counts down
the cook time in minutes:seconds.
NOTE: If the selec t e d produc t is a single stage
rec ipe the LEDS for all single stage
products with the same cook tempera-
ture and f an speed will ligh t . If the se-
lec te d produc t is a multiple st a ge rec-
ipe no o t h e r produ c t L EDS w ill ligh t.
NOTE: Press and hold the selected product
key for three seconds to cancel the
cook cycle for normal operation. To
cancel the cook cycle when u sing
shelf timing, press and hold the
SHELF KEY (18) for 3 seconds or
press TOGGLE/CLEAR (11) and the
corresponding shelf key.
3. When the cook time expires an alarm sounds
and the top display reads donE.
4. Press the selected product key to silence the
alarm. Remove the product. If shelf timing is
used, press the flashing SHELF KEY (18) to si-
lence the alarm.
Multiple Batch Cooking Procedure:
This procedure is for single stage recipes w ith the
same cook temperature and fan speed only.
NOTE: If the led next to the first desired product
key is lit skip step 1.
1. Press the first desired PRODUCT K EY (17).
The L EDS for all recipes with the same cook
temperature and fan speed will light.
The oven preheats to the cook temperature for
the selected product. When the oven reaches
¦10_ of the preheat temperature a n alarm
sounds and the bottom display reads Ready.
2. Load the product into the oven. Press the de -
sired PRODUCT KEY (17).
If the shelf timing function is toggled on for that
product key, t he top display reads SHLF and
the bottom display reads t he programmed
product’s time. Press a SHELF KEY (18) to as-
sign the product to that shelf and start the
cook cycle. The top display reads SHLF,the
bottom display gives the shelf #. Within five
seconds, the top display reads SH-1,thebot-
tom display gives the remaining cook time.
If the shelf timing function is toggled off for that
product key, pressing the product key will
start the cook cycle. The TOP DISPLAY (2)
r e a ds --- --- --- --- . T h e B OT T O M D I S P LAY ( 2 )
counts down the cook time in minutes: s ec-
onds.