Filter
Top Products
Operation
26
Pulse Plus
ON
OFF
OVEN OFF
COOL
DOWN
COOK
LIGHT S
FAN DELAY TIMER
TIMER
SOLID STAT E
THERMOSTAT
HI
LO
BLOWER
1
3
2
LIGHT OFF
OVEN READY
4
5
6
8
7
9
Figure 14
CONTROL DESCRIPTION
1. SELECTOR SWITCH --- controls power to the
oven for cook or cool do wn.
2. BLOWER SWITCH --- controls blower speed,
either hi or lo.
3. WHITE LIGHTS SWITCH --- controls interior
lights.
4. AMBER FAN DELAY LIGHT --- indicates t he
oven is in pulse plus.
5. FAN DELAY TIMER --- activates pulse plus for
0---10 minutes. The blower and burners pulse
on for 30 seconds and off for 30 seconds for
the duration of time set.
6. REDINDICATORLIGHT---indicatesovenisin
the cook timer cycle.
7. COOK TIMER --- activates an electric buzzer
that sounds when the cook time expires.
8. OVEN READY LIGHT --- when lit indicates
burner operation. When the light goes out, the
oven has reached operating temperature.
9. SOLID STATE THERMOSTAT --- allows either
8 pre-set temperatures to be selected in ac-
cordance with customer requirements, or an
infinite selection of temperatures from
0-500_F (0-260_C). (infinite control shown)
OPERATION
1. Turn the SELECTOR Switch (1) to COOK.
2. Set the SOLID STATE THERMOSTAT (9) to the
desired cook temperature.
3. Preheat the oven until the OVEN READY
LIGHT (8) goes out.
4. Load product into the oven.
5. Set FAN DELAY TIMER (5) for the desired time
for pulse plus operation.
6. Set the COOK TIMER (7) for t he desired cook
time.
7. When the buzzer sounds, remove product
from the oven. Turn the TIMER (7) knob to OFF
to silence t he buzzer.
8. Turn the SELECTOR SWITCH (1) to OVEN
OFF.