Filter
Top Products
SERVICING INSTRUCTIONS (continued)
19
CAUTION:
CHEMICAL BURN
HAZARD
Deliming chemicals may be
caustic. Wear appropriate
protective gloves and goggles
during this procedure.
Never siphon deliming
chemicals or solutions by
mouth.
This operation should only be
performed by qualified and
experienced service personnel.
IMPORTANT:
DO NOT spill, splash or pour
water or deliming solution into
or over any internal component
other than the inside of the
water tank.
IMPORTANT:
DO NOT allow any internal
components to come into
contact with the deliming
solution. Take care to keep all
internal components dry.
NOTE: Repeat steps 4 thru 5
as required to remove all scale
and lime build-up.
PROCEDURE: Delime the Water Tank
PRECAUTIONS: Disconnect brewer from electric power.
Allow brewer to cool.
FREQUENCY: As required (Brewer slow to heat)
TOOLS: Deliming Solution
Protective Gloves, Goggles & Apron
Mild Detergent, Clean Soft Cloth or Sponge
Bristle Brush, Bottle Brush
Large Sink (or other appropriate work area)
1. Unplug power cord. Turn off the water shut-off valve and
disconnect the water supply line from the brewer inlet fitting.
2. Remove the tank cover or water bottle assembly.
3. Mix 2 quarts of deliming solution according to the
manufacturer’s directions. Carefully pour the deliming
solution into the water tank. Allow to sit for 30 minutes, or as
directed by the manufacturer.
4. At end of soaking period, drain deliming solution.
Using a stiff bristle brush, scrub the heating element and
interior of the water tank to remove lime and calcium
build-up. Rinse with clean water. Drain all rinse water from
the tank.
5. Reconnect dispenser to electrical supply and reconnect water
supply.