Filter
Top Products
56
4. Screw in the screws using a slotted crewdriver
(blade width 8Ć11 mm). Close the door.
The oven must not be used again until the panels
have been correctly fitted.
Clean the seal on the oven door using detergent. Do
not use sharp or abrasive cleaning products.
Immediately after use, soak the accessories in
washingĆup liquid. Food residues can then be easily
removed with a brush or sponge.
Troubleshooting
Should a malfunction occur, it is often only due to a
minor fault. Please read the following instructions
before calling the afterĆsales service:
Malfunction
Possible cause Notes/remedial action
The oven does not work. The plug is not plugged in to
the mains.
Plug it in.
Power cut Check whether the kitchen light
switches on.
Blown fuse Look in the fuse box to make sure
that the fuse for the appliance is
okay.
Seal
Accessories