OVEN CONTROL KNOBS
SECTION FIVE: USING THE OVEN
Setting
Bake
/
Convection Bake
NOTE: When the oven is used for an
extended period of time at a high temperature,
the cooling blower will turn on. This is
normal. This cooling blower will also operate
during Broil and during the Self-Cleaning
cycle. If the blower is not running during
these modes, do not use the oven. Call
a qualified appliance technician to repair the
unit.
1. Select BAKE or CONVECTION•BAKE using the
Selector switch.
2. Set Temperature using the Oven Control Knob.
▲ The convection fan turns on six minutes after the oven is
turned on, if CONVECTION BAKE is selected.
▲ The OVEN and HEATING lights turn on.
▲ The HEATING light cycles off and on. The oven is
preheated when the HEATING light cycles off the first
time.
▲ The OVEN ON light illuminates and remains on until the
OFF Selector switch is turned off or the oven control knob
is turned to the OFF position.
▲ The needle of the gauge in the center of the control panel
moves to the selected temperature. The gauge is for
reference only.
TO SET THE GAS OVEN
These cooking modes are for baking, roasting or warming
using one, two or three racks.
BAKE/CONVECTION
BAKE
Page 27
TO SET THE 12-INCH OVEN
1. Select BAKE using Selector switch.
2. Set Temperature using the Oven Control Knob.
▲ The OVEN ON light turns on.
▲ The HEATING light turns on.
▲ The HEATING light cycles off and on. The oven is
preheated when the HEATING light cycles off the first
time.
▲ The OVEN ON light remains on until the Selector
switch is turned off.
OVEN CONTROL KNOBS