CAUTION:
Before removing the toe kick panel, disconnect the range from the
electrical power supply. Reinstall the toe kick panel before reconnecting
the range to the power supply and operating the range.
SERVICE INFORMATION
For handy reference, copy the infor-
mation below from the data rating
plate. Keep your invoice for War-
ranty validation.
Model Number
Serial Number
Date of Purchase
Dealer’s Name
Dealer’s Phone Number
Service Center's Name
Service Center’s Phone Number
Also, enter this information on
the Product Registration Form in-
cluded with this product, then mail it
to the indicated address.
Before calling for Service, check the following to avoid unnecessary
service charges.
Be sure to check these items first:
Is there a power outage in the area?
Is the household fuse blown or the circuit breaker tripped?
Is the range disconnected from the electrical supply?
IF THE BURNERS DO NOT IGNITE
• Are the burner caps properly aligned and seated in the burner base?
• Are the burner ports clogged?
• Is a fuse blown or is the circuit breaker tripped?
• Is the manual shut-off valve closed, preventing the flow of gas?
DATA RATING PLATE
The data rating plate shows the model and serial number of your range. It is
located behind the toe kick at the bottom of the range. To access the rating
plate, remove the two toe kick attachment screws, then carefully remove the
toe kick panel.
For all models, the data rating plate is found on the component tray behind the
toe kick panel.
BEFORE CALLING FOR SERVICE
!
Page 42
➞
PGR Data Rating Plate Location
SECTION SEVEN: BEFORE CALLING FOR SERVICE