Filter
Top Products
OPERATING YOUR BREVILLE PRODUCT
9
STEP 1
Remove lid from the deep fryer by
grasping the handle on top and lift off.
STEP 2
The wire frying basket has a hinged handle
for compact storage. Remove the basket
from the deep fryer. Extend and lock the
basket handle into position by squeezing
the two handle prongs together, pull back
and lock behind the two wire supports
extending from edge of basket.
STEP 3
Lift the control panel with attached element
upwards and away from the deep fryer.
STEP 4
Remove the inner frying bowl by
grasping the rim and lifting upwards.
STEP 5
To reassemble the deep fryer, reverse
steps 1–4.
WARNING
When assembling your deep fryer for
use, please ensure the narrow tongues
in the control panel are inserted into
the corresponding grooves of the deep
fryer body. The deep fryer will not
operate unless correctly assembled.
BEFORE FIRST USE
Remove any promotional materials and
packaging materials before use. Wash the
lid, removable inner bowl, stainless steel
outer body and wire frying basket in hot
soapy water, rinse and dry thoroughly.
Wipe the element with a soft, damp cloth
and dry thoroughly. Reassemble and ensure
the bowl is completely free of water before
adding any oil.
1. Place the deep fryer on a dry, level
surface. Ensure the deep fryer is not too
close to the edge of the bench top, and
that the power cord or basket handle
does not extend over the edge.
Remove the frying basket from the
deep fryer and add oil to the bowl.
Do not add less than the minimum
level mark (2.5 quarts) or exceed the
maximum level mark (4 quarts).
IMPORTANT
NEVER exceed the maximum level
mark with oil (maximum is 4 quarts).
This product must be filled with oil to
the exact marked level. The product
will be severely damaged if heated
without oil in the frying bowl.
2. Replace the lid.
3. Plug in the power cord. Ensure cord is
fully extended. The deep fryer will beep
once for self checking, the display panel
will illuminate with white background
light. The deep fryer enters COOK mode.