Breville BDF500XL Fryer User Manual


 
14
PAge heAder.....
COOKING WITH YOUR BREVILLE PRODUCT
Fries - Twice Fried
When FRIES - TWICE FRIED mode is
selected and confirmed by pressing the
SCROLL/SELECT knob,
1ST FRY/2ND FRY displays.
1. Select 1ST FRY by highlighting and
pressing SCROLL/SELECT knob to
confirm. 1ST FRY flashes to indicate it
is the selected option. Once the selection
has been confirmed, the unselected
option display turns off. After FRIES -
TWICE FRIED and 1ST FRY have been
selected, the fryer will automatically set
the time and temperature.
NOTE
For FRIES - TWICE FRIED, FRESH
is the only available option as frozen
fries have been precooked.
2. Start the heating process by pushing
the START/CANCEL button. The
display will turn orange to indicate
heating. FRIES - TWICE FRIED, FRESH,
1ST FRY, HEATING and the actual
temperature of the oil will be displayed.
The deep fryer will now preheat the oil.
Once the deep fryer has reached the
correct temperature, the deep fryer will
beep once to indicate it is ready to cook.
PRESS TIMER will display.
3. Lower the basket of fresh fries into the
oil and press the TIMER button. When
the TIMER button is pressed, the timer
will start to count down, and the cooking
process begins.
NOTE
When cooking fries using the
Twice Fried method, it is not
recommended to cook with the
lid on due to the possible build up of
excess condensation.
NOTE
The fryer is programmed to heat to
the correct overshoot temperature
because when the cooler fries are
lowered into the oil, the temperature
of the oil will fall. The overshoot
temperature ensures that the fries
cook at the optimal temperature,
even after they initially cause the oil
temperature to drop.
When the timer finishes counting down,
the alarm will sound to signal the end of
the cooking cycle. PRESS TIMER, FRIES -
TWICE FRIED, 1ST FRY and FRESH, the
time and temperature will be displayed.
4. Push the TIMER button to stop the
alarm and raise the basket. The deep
fryer will automatically begin to reheat.
Once the deep fryer has reached the
correct temperature, it is ready
to proceed.
NOTE
In FRIES - TWICE FRIED mode it
is possible to adjust the timer and
temperature once the timer has
started but it is not possible to switch
between 1ST FRY and 2ND FRY.
At this point, the fryer is able to proceed to
either the 2ND FRY or to another 1ST FRY
of a second batch of fries, depending on the
total quantity to be fried. FRIES - TWICE
FRIED, FRESH, 1ST FRY, PRESS TIMER, the
time and cooking temperature display.
NOTE
If a second batch of fries is to be
cooked, we recommend to 1ST FRY
both batches and then proceed to
the 2ND FRY for both batches. This
process means less heating and
cooling of oil, providing better results
and is more time efficient.