Filter
Top Products
16 17
OPERATING YOUR BREVILLE PRODUCT
STEAM
For instant steam, move STEAM LEVER to
OPEN position. The Steam LED will be On.
To turn STEAM off, move STEAM LEVER to
CLOSED position. The machine will return
to STANDBY mode.
CAUTION: BURN HAZARD
Pressurised steam can still be released,
even after machine has been switched off.
Children must always be supervised.
HOT WATER
For instant hot water, rotate the HOT
WATER dial to OPEN position. The Hot
Water LED will be On.
To turn HOT WATER off, rotate the HOT
WATER dial to CLOSED position. The
machine will return to STANDBY mode.
NOTE
You cannot run hot water and extract
espresso at the same time.
LCD PROGRAMMING FUNCTIONS
To program the machine, press MENU
button once. The LCD will display all
programming functions. Continue to
press MENU button to select your
desired function.
At any stage during programming, press
EXIT to return to STANDBY mode.
NOTE
The MENU button is disabled when
the machine is extracting espresso or
delivering hot water.
OPERATING YOUR BREVILLE PRODUCT
SHOT DURATION
1 CUP Duration Programming
Press MENU button until SHOT VOL icon
flashes and 1 CUP is displayed on the LCD
screen.
Press 1 CUP button to start water flow from
the group head.
Press 1 CUP again once required extraction
duration has been reached.
The machine will beep twice to indicate the
new 1 CUP duration has been set.
2 CUP Duration Programming
Press MENU button until SHOT VOL icon
flashes and 2 CUP is displayed on the LCD
screen.
Press 2 CUP button to start water flow from
the group head.
Press 2 CUP again once required extraction
duration has been reached.
The machine will beep twice to indicate the
new 2 CUP duration has been set.
NOTE
1 & 2 cup volumes use duration to
control espresso volume as default
setting. Access the Advanced
Menu (page 20) if you wish to use
Volumetric controls for these volumes.
SHOT VOLUME
1 CUP Volume Programming
Press MENU button until SHOT VOL
icon flashes and 1 CUP is displayed on
the LCD screen.
Dose & tamp the portafilter with ground
coffee. Press 1 CUP button to start espresso
extraction. Press 1 CUP again once desired
volume of espresso has been extracted.
The machine will beep twice to indicate the
new 1 CUP volume has been set.
2 CUP Volume Programming
Press MENU button until SHOT VOL
icon flashes and 2 CUP is displayed on
the LCD screen.
Dose & tamp the portafilter with ground
coffee. Press 2 CUP button to start espresso
extraction. Press 2 CUP again once desired
volume of espresso has been extracted.
The machine will beep twice to indicate the
new 2 CUP volume has been set.