Filter
Top Products
12 13
PAGE HEADER..... PAGE HEADER.....
OPERATING YOUR BREVILLE PRODUCT
GENERAL OPERATION
1 CUP
Press 1 CUP once to extract a single shot
of espresso at the pre-programmed
duration (30secs). The extraction will start
using the low pressure pre-infusion.
The machine will stop after 1 CUP volume
has been extracted and will return to
STANDBY mode.
2 CUP
Press 2 CUP button once to extract
a double shot of espresso at the
pre-programmed duration (30secs).
The extraction will start using the low
pressure pre-infusion.
The machine will stop after 2 CUP volume
has been extracted and will return to
STANDBY mode.
MANUAL
The MANUAL button allows you to
control the espresso pour volume to suit
your preference.
Press MANUAL button once to start the
espresso extraction. The extraction will
start using the low pressure pre-infusion.
Press MANUAL button again to
stop extraction.
NOTE
To stop an extraction at any time,
press the 1 CUP, 2 CUP or MANUAL
button and the machine will return to
STANDBY mode.
OPERATING YOUR BREVILLE PRODUCT
STEAM
For instant steam, move STEAM LEVER to
OPEN position. The Steam LED will be On.
To turn STEAM off, move STEAM LEVER to
CLOSED position. The machine will return
to STANDBY mode.
CAUTION: BURN HAZARD
Pressurised steam can still be released,
even after machine has been switched off.
Children must always be supervised.
HOT WATER
For instant hot water, rotate the HOT
WATER dial to OPEN position. The Hot
Water LED will be On.
To turn HOT WATER off, rotate the HOT
WATER dial to CLOSED position. The
machine will return to STANDBY mode.
NOTE
You cannot run hot water and extract
espresso at the same time.
LCD PROGRAMMING FUNCTIONS
To program the machine, press MENU
button once. The LCD will display all
programming functions. Continue to
press MENU button to select your
desired function.
At any stage during programming, press
EXIT to return to STANDBY mode.
NOTE
The MENU button is disabled when
the machine is extracting espresso or
delivering hot water.