Filter
Top Products
16 17
PAGE HEADER..... PAGE HEADER.....
OPERATING YOUR BREVILLE PRODUCT
Press UP or DOWN arrow to adjust
AUTO START to the desired time.
(default AUTO START time set at 7:00am).
Press EXIT button. Machine will beep once
to confirm setting.
SET CLOCK
Press MENU button until SET CLOCK
icon flashes. The current Clock Time will
be displayed on the LCD screen.
Press UP or DOWN arrow to adjust the time.
Press EXIT button. Machine will beep once
to confirm setting.
CLEAN CYCLE
Press MENU button until CLEAN CYCLE
icon flashes and PUSH is displayed on the
LCD screen.
To start the CLEAN CYCLE press the
illuminated MANUAL button.
The CLEAN CYCLE icon will flash and
the machine will start to countdown from
370 seconds.
The machine will return to STANDBY
when the cleaning cycle has ended.
Refer to cleaning instructions on page 23
for instructions.
ADVANCED MENU
Press & Hold - 1 CUP
Press & hold 1 CUP to bypass the
pre-infusion phase and deliver water to
the group head at the full 9 bar pressure.
Release button to stop extraction. This
function can be used when purging the
group head.
Press & Hold - 2 CUP
Press & hold 2 CUP to bypass the
pre-infusion phase and deliver water to
the group head at the full 9 bar pressure.
Release button to stop extraction. This
function can be used when purging
the group head.
OPERATING YOUR BREVILLE PRODUCT
Press & Hold - MANUAL
Press & hold the MANUAL button to
deliver water to the group head at low
pre-infusion pressure. When MANUAL
button is released, water will continue at
the full 9 Bars of pressure. Press MANUAL
button again to stop extraction .
This function can be used to manually
control the pre-infusion duration.
ACCESS ADVANCED MENU
To access the Advanced Menu:
With machine OFF, press and hold the
1 CUP button, then press the POWER
button at the same time.
POWER
POWER
TURN
POWER OFF
THEN PRESS
& HOLD
Resetting default settings
The machine has the following
default settings:
1. Temperature – 93°C
2. Pre-Infusion – Duration Pr07
3. Pre-Infusion – Power PP60
4. Steam temperature - 135°C
5. Auto Start - OFF
6. Audio - LO
7. Water Hardness - 3
8. Espresso Volume durations –
30/30 secs
To reset machine to original default settings,
first enter Advanced Menu. rSET will be
displayed on the LCD. Press the MENU
button to reset the machine to the default
settings. The machine will beep 3 times
to confirm.
The machine will then prompt you to set the
water hardness. Select your water hardness
using the UP & DOWN arrows & press
MENU to confirm or press EXIT to return
to STANDBY mode.
Temperature Unit - ˚C/˚F (SEt)
Temperature Unit will be displayed on the
LCD screen as SEt. Press MENU to Select.
Use UP and DOWN arrows to select desired
temperature unit. Press MENU to set.
Machine will beep once to confirm selection.
Press EXIT to return to STANDBY mode.