Breville BRC520 Rice Cooker User Manual


 
11
OPERATING YOUR BREVILLE RISOTTO & RICE™
Fig. 2
4. Add the washed rice to the removable
cooking bowl, ensuring rice is spread
evenly across the bottom of the bowl and
not heaped to one side (Fig 3).
Fig. 3
5. Add water using the following ratios:
White Rice = 1 cup water : 1 cup rice
Brown Rice = 1½ cups water : 1 cup rice
6. Place the glass lid into position.
7. Plug power cord into a 230V or 240V
power outlet and then switch the power
on at power outlet. The WARM light
will illuminate.
8. Press the MENU SELECTOR button
to the RICE setting. The red light
will flash for a few seconds, then the
light will permanently illuminate and
cooking will commence.
9. When cooking is complete, the Ready
beeps will sound and the Risotto &
Rice™ will automatically switch to the
WARM setting. The orange WARM
light will illuminate.
10. Open the lid and turn the rice over with
the serving spoon provided. Replace the
lid and allow the rice to stand for 10-15
minutes before serving. This allows
any excess moisture to be absorbed,
resulting in a fluffier rice texture.
NOTE
After using the RICE setting the
appliance will automatically switch to
the WARM setting for up to 5 hours.
NOTE
Do not remove the glass lid until ready
to serve (except for when turning over
rice after cooking is complete or as
suggested in the recipes).
NOTE
To stop the WARM setting, switch off
at the power outlet and then unplug
the power cord.
IMPORTANT
Always place liquid into the
removable cooking bowl before
pressing the MENU SELECTOR
button to the RICE setting.
Do not interfere with the automatic
selector control during operation.
To prevent scratching the
non-stick surface of the removable
cooking bowl, always use wooden
or plastic utensils.