Chapter 7
48
External and extension
telephones
7
Connecting an external or
extension telephone 7
You can connect a separate telephone
directly to your machine as shown in the
diagram below.
Connect the telephone line cord to the jack
labeled EXT.
Before you connect the external telephone,
remove the protective cap (3) from the EXT.
jack on the machine.
1 Extension telephone
2 External telephone
When you are using an external telephone,
the LCD shows Telephone.
Using external and extension
telephones 7
Using extension telephones: 7
If you answer a fax call at an extension
telephone, you can make your machine
receive the fax by pressing the Fax Receive
Code l 51. If the machine answers a voice
call and pseudo/double-rings for you to take
over, you can take the call at an extension
telephone by pressing the Telephone Answer
Code #51. (See F/T Ring Time (Fax/Tel
mode only) on page 36.)
Using an external telephone
(connected to the EXT. jack of the
machine):
7
If you answer a fax call at the external
telephone, you can make the machine
receive the fax by pressing Black Start, and
choosing 2.Receive.
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at the external telephone by
pressing Hook.
If you answer a call and no one is on
the line:
7
You should assume that you're receiving a
manual fax.
Press l 51 and wait for the chirp or until the
LCD shows Receiving, and then hang up.
Note
You can also use the Easy Receive
feature to make your machine
automatically take the call. (See Easy
Receive on page 37.)
1
2
3