Filter
Top Products
Page 30
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
Setting PulseBrew/Preinfusion – MANUAL Pulse
Brew
NOTE: If the brewer is already on the SET PULSE
BREW screen, skip steps 1 through 6, and proceed
directly to step 7.
1. Press and hold the right hidden button until the dis-
play reads SET LANGUAGE. Press the right hidden
button until the display reads REVIEW RECIPES.
2. Press YES to proceed. The display should now read
NO NAME COFFEE, along with MODIFY SHOW
NEXT.
3. Press and release NEXT to advance to the desired
recipe to be modifi ed.
4. Press and release MODIFY. The display should read
BREW OZ:
5. Press and release DONE. The display should read
2 BATCHES DONE?
6. Press and release YES. The display should now
read %BYPASS.
7. Press and release DONE. The display should now
read 2 BATCHES DONE?
8. Press and release YES. The display should now
read SET PULSE BREW.
9. Press and release YES. The display should now
read SELECT METHOD.
10. Press and release MANUAL. With MANUAL fl ash-
ing, press and release NEXT.
11. The display should now read 1
st
ON TIME and a
batch light will be blinking. Press and release the
batch size to be modifi ed.
12. Using (-) and (+), adjust the 1
ST
ON TIME.
13. When fi nished, press the other batch size and repeat
step # 12.
NOTE: To disable pulse brew, set 1
st
ON TIME to OFF.
14. When fi nished setting both batch sizes, press and
release DONE.
15. The display should now read OFF TIME. Adjust
the OFF TIME using (-) and (+).
16. When fi nished, press the other batch size and repeat
step # 15.
17. When fi nished setting both batch sizes, press and
release DONE.
18. The display should now read LAST ON:. Adjust the
LAST ON TIME using (-) and (+). If PREINFUSION
is desired, set the LAST ON TIME to PreI.
19. When fi nished, press the other batch size and repeat
step # 18.
20. When fi nished setting both batch sizes, press and
release DONE.
21. The display will show the three times just entered.
Press and release each batch size to display the set-
tings for that batch. If the 1
ST
ON TIME is set to OFF,
the display will read PULSE BREW DISABLED. After
a 5 second delay, the display will read 2 BATCHES
DONE?
22. If both the pulse brew settings for both batch sizes
are not correct, press and release NO to return to
the 1
ST
ON TIME setup screen and repeat steps 12
through 21.
23. If both batch sizes are correct, press YES. The
display should now read DRIP TIME. To exit to
the MAIN SCREEN, press and release the ON/OFF
button.
37077 071206