Filter
Top Products
Page 36
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
ENABLE ADS
NO DONE YES
WRITE TOP LINE?
NO YES
NEW AD?
CARD NO WRITE
2 LINES 16 CHARS
AVAILABLE
SCROL THRU ALPHA
NEXT->NEXTLETTER
BREW
A
BREW
B
BREW
C
CARD CONTAINS AD
SHOW QUIT SAVE
AD SETUP
COMPLETE
PRESSING DONE WILL
DISABLE THIS FUNCTION
AND ADVANCE TO
ENABLE SANITATION
WITH NO FLASHING
PRESS DONE
WITH YES FLASHING
PRESS DONE
PRESSING NO WILL
ADVANCE TO
WRITE BTM LINE?
PRESSING SHOW
WILL DISPLAY AD
PRESSING NO WILL
RETURN TO
MAIN SCREEN
IF NEITHER LINE
WAS WRITTEN, DISPLAY
WILL ADVANCE TO
ENABL SANITATION
PRESSING NO WILL READ
ADVERTISEMENT
NOT SAVED!
THEN *****
PRESSING EDIT WILL
RETURN TO
WRITE TOP LINE?
A
SCROLL DONE NEXT
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
WRITE BTM LINE?
NO YES
BREW
A
BREW
B
BREW
C
(VIEW WRITTEN
ADVERTISEMENT)
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
SAVE?
NO EDIT YES
ADVERTISEMENT
SETUP COMPLETE
ENABL SANITATION
NO YES
A
SCROLL DONE NEXT
P2872
ENABLE ADS (Continued)
37077 091704
Procedure to READ in a New Ad:
NOTE: Saving a new ad will erase any previously saved
ad in the brewer’s memory.
1. From the NEW AD? screen, press and release
CARD.
2. The display will show INSERT AD CARD. Place the
AD CARD vertically so that the top end of the "chip"
is beneath the sensing coil (located on the middle
of the underneath side of the front display panel).
3. After a short pause, the display will read CARD
CONTAINS AD. To view the ad, press and release
SHOW. To save the ad to the brewer's memory,
press and release SAVE. To cancel, Press QUIT.
4. After the ad is saved, the display will read AD SETUP
COMPLETE, and then will advance to to next pro-
gramming function, ENABLE SANITATION.