Filter
Top Products
19
SITUATION EXPLANATION
The REFILL WATER INDICATOR
has come on.
The POD HOLDER INDICATOR
has come on.
The water shuts off and comes
back on again when brewing.
Pour-Over only:
The WATER RESERVOIR has run low on water.
Slide the lid open and pour additional water
into the reservoir, or remove the reservoir
and fill it at a sink, or other water source.
CAUTION: Do not place the brewer in a sink
or other water source. Do not fill past the
Maximum fill line.
Automatic only:
The WATER RESERVOIR has recently been
removed from the brewer and replaced empty.
Press the Coffee or Tea brew button to
activate fill the water reservoir.
CAUTION: To av
oid accidental burns, always
have a cup on the drip tray grate when
pressing either brew button. Do not place
hands under the pod holder outlet.
The POD HOLDER is missing.
Place the pod holder into the machine and
press it firmly into place.
The POD HOLDER is not locked in place.
Carefully remove and re-insert the pod
holder into the machine while listening
for a clicking sound. The POD HOLDER
INDICATOR on the control panel should go
out.
The TEA BREW BUTTON has been pressed to
start the brew cycle.
Do NOT press the TEA BREW or COFFEE
BREW button during the brew cycle. This
will stop the brew cycle. The brewer is
using a Pulse Brew
™
technology to steep tea
properly. The water will shut off and turn on
(Continued)