Filter
Top Products
13
PRIMING THE CONCENTRATE LINES
1. Open the dispenser door.
2. Select Prime on the Function Selector Switch and Run on the Mode Selector Switch.
3. Close the dispenser door.
4. Place a container under the dispense tip.
5. Activate the appropriate dispense button, "Small" cup button for Left Pump, "Large" cup button for Right
Pump, until concentrate flows from the dispense nozzle. Priming may take 10 to 20 seconds.
6. Open the dispenser door; select Normal on the Function Selector Switch.
Note: Concentrate may continue to drip out of dispense tip. The user may wish to Rinse (refer to Rinsing) the
dispenser to clean out the remaining concentrate.
2
6
39328.3 012113