Filter
Top Products
25.
You can also program the output visually (chapter 11.2).
You can also re-program all buttons to different values. Re-pro-
gramming changes the outcome of the beverage permanently.
Re-programming is easy. The re-programmed values are stored
in the machine’s memory until you re-program it again.
Example: The 1-cup espresso button is set in the factory to 1.5
OZ volume, strength STRONG and temperature HIGH. To
re-program the 1-cup espresso button to
2.5OZ, XSTRONG and
temperature NORMAL proceed as follows:
READY
1. Push and hold the Rotary Dial until the display shows RINSE.
2. Turn the dial clockwise until the display shows
BUTTONS.
3. Push the rotary dial. The display flashes SELECT BUTTON.
4. Push the 1-cup espresso button. The display shows WATER
(this determines the volume in your cup).
5. Push the rotary dial. The display shows
1.5 OZ.
6. Turn the dial until the display shows 2.5 OZ.
7. Push the rotary dial. For two seconds the display shows OK
and then WATER again. You have now changed the coffee
volume from 1.5 to 2.5 oz for the 1-cup espresso button.
8. Turn the dial clockwise until the display shows STRENGTH.
9. Push the rotary dial. The display shows
STRONG.
10.Turn the dial until the display shows XSTRONG.
11.Push the rotary dial. For two seconds the display shows
OK
and then STRENGTH again. You have now changed the
coffee strength from
STRONG to XSTRONG for the 1-cup
espresso button.
12.Turn the dial clockwise until the display shows TEMP.
13.Push the rotary dial. The display shows
HIGH.
14.Turn the dial until the display shows NORMAL.
15. Push the rotary dial. For two seconds the display shows OK
and then TEMP. again. You have changed the temperature
from
HIGH to NORMAL for the 1-cup espresso button.
16.Turn the dial clockwise until the display shows EXIT.
17.Push the rotary dial. The display shows BUTTONS.
18.Turn the dial until EXIT and push the dial. READY.
17.3 ENERGY SAVING MODE
The J5 is set to ENERGY – . This means the machine is always
ready to brew coffee.
You can program an energy savings mode
ENERGY ✓. The J5
will lower the stand-by temperature. In case you want to brew
coffee the machine will then heat up for approx. 30 seconds.
To change the energy setting:
Buttons
1-cup buttons:
2-cup buttons:
Hot water
Steam
Parameters
Volume:
Strength:
Temperature:
Volume:
Temperature:
Volume:
Temperature:
Duration:
Options
0.5 to 8.0 oz.
MILD, NORMAL, STRONG, XSTRONG
NORMAL, HIGH
0.5 to 8.0 oz. per cup
NORMAL, HIGH
0.5 to 15 oz.
REGULAR, NORMAL, HOT
3 to 120 seconds