Filter
Top Products
• Push the Dial. The display shows SELECT PRODUCT.
• Push for example the 2-cup espresso button. Turn the dial
and select
3 OZ.
• Push the dial to confirm. The 3-tone melody confirms the new
setting. From now on, the 2-cup espresso button will produce
a total of 6 oz. of coffee. WATER QUANTITY. To select another
coffee button, push the Dial again and repeat the steps above.
Or you can turn the Dial to
EXIT.
• Push the Dial to get back to SELECT PRODUCT.
16.3 TEMPERATURE / TEMP
You can program all five coffee buttons individually to brew at
temperature NORMAL or HIGH. In HIGH the coffee is approx.
7º F higher than in NORMAL.
Please note: The temperature is also influenced by the resist-
ance of the coffee. Finer ground coffee and more coffee in the
brewing chamber will result in more resistance, increasing the
temperature of your coffee. Also, the first cup of coffee is always
slightly less hot than subsequent coffees.
SELECT PRODUCT
• Push and hold the Dial. FILTER
• Turn the Dial until the display shows TEMP.
• Push the Dial. The Display shows SELECT PRODUCT.
• Push for example the 1-cup coffee button. HIGH.
• Turn the dial and select
NORMAL.
• Push the dial to confirm. The 3-tone melody confirms the new
setting. From now on, the 1-cup coffee button will use the
NORMAL temperature setting. TEMP. To select another coffee
button, push the dial again and repeat the steps above.
Or you can turn the Dial to
EXIT.
• Push the Dial to get back to
SELECT PRODUCT.
16.4 HOT WATER VOLUME / WATER PORTION
You can program the hot water spout to dispense between 1
and 15 oz. of water and then stop. This is useful if you use the
hot water spout to make an 8 oz. cup of tea.
Please note: when using the hot water function, you can always
stop the flow of hot water simply by turning the hot water dial
back to the coffee position.
SELECT PRODUCT
• Push and hold the Dial. FILTER
• Turn the Dial until the display shows WATER PORTION.
• Push the Dial. The Display shows PORTION 5.0 OZ.
• Turn the dial to change the hot water volume from 1 to 15 oz.
• Push the dial to confirm. The 3-tone melody confirms the new
setting. WATER PORTION.
• Turn the Dial to EXIT.
• Push the Dial to get back to
SELECT PRODUCT.
16.5 STEAM DURATION / STEAM PORTION
When using the frothXpress Plus system, you can set the
amount of hot steamed or frothed milk to a certain volume by
using the Steam Portion button (Fig. 3,K). By selecting a certain
steaming time the machine will always siphon, steam and froth
the same amount of milk and then stop automatically. You can
set the steam time between 3 and 120 seconds.
Please note: you can always stop the steam action by simply
pushing either steam button. Push either steam button again
and steaming will continue.
SELECT PRODUCT
22.