Filter
Top Products
8-8
Installation Guide for Cisco Unity 4.0(5) and Later Voice Messaging with Microsoft Exchange 2003/2000 (With Failover Configured)
OL-7371-02
Chapter 8 Installing and Configuring Cisco Unity Software
Installing and Configuring Cisco Unity Software
Step 4 Click Next.
Step 5 Follow the on-screen prompts to complete the configuration.
When the wizard is complete, the Configure the Cisco Unity Message Store page appears in the main
window.
Configuring Cisco Unity for the Message Store
From the Cisco Unity Installation and Configuration Assistant, you run the Cisco Unity Message Store
Configuration wizard fourth to configure Cisco
Unity for the message store.
To Configure Cisco Unity for the Message Store
Step 1 On the Configure the Cisco Unity Message Store page, click Run the Cisco Unity Message Store
Configuration Wizard. (Note that you should be logged on to Windows with the Cisco
Unity
installation account.)
Step 2 Confirm that Exchange is running on the partner server that you chose in the “Determining the Partner
Exchange Server” section on page 6-2. If Exchange is not running, configuring the message store on the
Cisco Unity server will fail.
Step 3 In the Welcome dialog box, click Next.
Step 4 Enter the password for the installation account, and click Next.
Step 5 If you did not create a Cisco Unity administration account in the “Creating the Accounts Required for
the Cisco Unity Installation” section on page 7-3, skip to Step 6. When installation is complete, you will
log on to the Cisco Unity Administrator by using the installation account.
If you created a Cisco Unity administration account in the “Creating the Accounts Required for the
Cisco Unity Installation” section on page 7-3, specify the account:
a. Click Change.
b. In the Select User dialog box, double-click the name of the Cisco Unity administration account.
Step 6 Click Next.
Step 7 In the Select Partner Message Store dialog box, click Microsoft Exchange 2000 or Microsoft
Exchange
2003, depending on the version of Exchange installed on the partner Exchange server, and
click Next.
Step 8 In the Select Mailbox Location dialog box, choose the partner Exchange server and the mailbox store in
which to create new mailboxes, and click Next.
Step 9 In the Select Active Directory Containers for New Objects dialog box, choose the domain in which you
want Cisco
Unity to create users and distribution lists.
If you created custom organizational units for users or distribution lists, click the corresponding Change
button to specify them here.
Step 10 Click Next.
Step 11 Click OK to stop Cisco Unity services.