Filter
Top Products
HDC II Programming Guide Basic Setup
July, 2003 10 6730018
SET PRINTER OR DEX OPTIONS
1. Follow the steps in "Gain Access To The Supervisor Mode", PAGE 7.
2. Press , then until the display shows:
- means that data will be sent directly to a printer,
- OR -
means that data remains in memory after it is downloaded into a
portable data collection device (PDCD),
- OR -
means that resettable data is cleared after it is downloaded into a
PDCD.
- OR -
- a special DEX option. All sales data will become non-resettable.
Consult your DEX supplier before choosing this option.
3. Press to change between the three choices.
4. CONTINUE.
SELECT PRINTER BAUD RATE
(PRINTER MODE ONLY)
1. Press . One of the following is displayed:
2. Press until the correct baud rate for your printer is displayed.
3. CONTINUE.
BAUD
RATE
The speed of data transfer, expressed in bits per second.
Your printer can receive data at a certain rate, and you must
tell the machine what that rate is.