Filter
Top Products
HDC II Programming Guide Set up a Hot Drink
July, 2003 40 6730018
7. Press . The display shows or "OFF"
means there is no custom message selected, and "X" represents the custom
message number set for this interval. Press the number key of the message
(1 through 8) you want displayed. To edit this message, press
and
follow the procedure given in EDIT CUSTOM MESSAGE (page 49).
Press 0 to turn the message OFF for this time interval.
8. Press . The display shows .
9. Press 1, 6, and 0. The screen displays .
10. CONTINUE.
SET THE AUTOMATIC BREWER RINSE TIME
(BREWER EQUIPPED MACHINES ONLY)
The brewer will be automatically rinsed by one of two methods: You can specify
a set time of day when the brewer is rinsed, or you can specify that rinsing takes
place a set time after the last brewed selection is vended.
1. Press then until the display shows one of the following:
The time of day (in hours and tenths of hours) the machine
rinses the brewer. In this example, brewer rinse takes place each day at 4:30
am. Range: 0.0 - 23.9 in .1 hour (6 minute) increments.
- OR -
. In this example, brewer rinse takes place 2.5 hours after the
last vend. Range: 2.0 - 12.5 hours, in .1 hour (6 minute) increments.
NOTE
If 24 hours passes without a vend, no rinsing will take place.
This eliminates unnecessary rinsing over a weekend or holiday.
2. Whichever one of the two choices is displayed is the method by which the
brewer will be rinsed. Press
to switch between these two displays.
Enter a new time, if desired.
3. CONTINUE.