Filter
Top Products
View Machine Data HDC II Programming Guide
6730018 63 July, 2003
VIEW CUP RING CYCLES RELATED TO SUREVEND™
(NOT SHOWN IF ZERO)
1. Press , then press until the display shows . XX
represents the number of vends during which more than one ring cycle was
required to successfully dispense a cup.
2. Press to clear the count.
3. CONTINUE.
VIEW TIMES NO CUP WAS DETECTED AFTER A CUP
RING CYCLED
(NOT SHOWN IF ZERO)
1. Press , then press until the display shows . XX
represents the number of times a cup was not detected after ring 1 cycled.
Check the cup ring adjustment (see the Operator’s Guide), or the cup stack
for damage if the count is excessive.
2. Press to clear the count.
3. Press until the display shows . XX represents the num-
ber of times a cup was not detected after ring 2 cycled. Check the cup ring
adjustment (see the Operator’s Guide), or the cup stack for damage if the
count is excessive.
4. CONTINUE.
VIEW HOME SWITCH USAGE RELATED TO
SUREVEND™
(NOT SHOWN IF ZERO)
1. Press , then press until the display shows . XX
represents the number of times home switches were used due to
’ selected but not working.
2. CONTINUE.