Filter
Top Products
Check the Setup HDC II Programming Guide
6730018 51 July, 2003
VIEW WATER TANK TEMPERATURE
Check the Setup
1. Press . The display shows ° . "XXX" is the current water
tank temperature. "° F" means that the temperature is displayed in degrees
Fahrenheit (may be shown in degrees Celsius, depending upon your choice.
See
"View or Set the Hot Water Tank Temperature", PAGE 38). A decimal
point shown in the display indicates that the tank heater is operating.
2. CONTINUE.
VIEW MACHINE TYPE/CONFIGURATION SETTING
1. Press , then press until display shows
then press until the display shows - - . P, Q, R, and S rep-
resent settings specific to your machine. See "SET THE MACHINE TYPE
AND CONFIGURATION CODE (SUPERVISOR MODE ONLY)",
PAGE 20 for an explanation of this display.
2. CONTINUE.