Filter
Top Products
5
gently pull out the cup to dispose of its contents
(see figure H). Clean cup and replace in base.
(See Cleaning and Care, page 6.)
5. Thoroughly clean grill/griddle plate. (See
Cleaning and Care.)
6. Flip the plate over, and return to base.
7.
Make sure that drip hole in plate lines up over
drip cup (see figure H).
8. Reconnect the plug into a standard
electrical outlet.
Using the kebab feature
1. Assemble the unit with the grill/griddle
plate, kebab drawers, and drip cup in their
proper positions. Note: grill/griddle plate
must be on unit when using kebab feature.
Please keep in mind that it is very hot when
the unit is operating.
2. Turn the temperature control dial to desired
temperature and preheat for approximately
10 to 12 minutes.
3. Prepare food according to your favorite
kebab recipe and slide pieces onto
skewers.
4. Pull drawers to open. Place skewers into
the skewer slots so the star-like shape at
the end of each handle is inserted into a
gear slot in the front end of the kebab
drawer. Close drawer
securely.
Note: If using large
cubes of meat or
seafood, you may
only be able to cook
six kebabs at once.
5. Press the kebab control switch to ON. The
switch light will illuminate to let you know
kebabs are rotating.
6. To check to see if kebabs are cooked,
press the kebab control switch to stop
skewers from turning and remove a kebab
with a potholder. If more time is needed
replace the skewer and press the kebab
control switch to resume cooking.
Using the hot dog feature
1. Assemble the unit with the grill/griddle plate, kebab drawers, and
drip cup in proper positions. Note: The grill/griddle plate must be
on unit when using hot dog feature. Please keep in mind that it is
very hot when the unit is operating.
2. Turn the temperature control dial to desired temperature and
preheat for approximately 10 to 12 minutes.
3. Assemble the hot dog rollers by slipping the
kebab skewers through the holes in each
end of the hot dog roller caps.
4. Pull drawers to open. Place skewers with
hot dog rollers into the skewer slots so the
star-like shape at the end of each handle is
inserted into a gear slot in the front end of
the kebab drawer.
5. Using tongs,
position the hot
dogs in between two
of the hot dog
rollers. Four hot
dogs will fit over
each of the drawers.
Close drawer securely.
H.