Filter
Top Products
CARE AND CLEANING
19
DEFROSTING THE BEVERAGE DISPENSER
If frost builds up in and around the beverage dispenser, that means there is too much
humidity near the unit. Move the unit to a less humid location.
NOTE: DO NOT USE A HEATER OR ANY SHARP UTENSILS TO REMOVE FROST
OR CLEAN THE BEVERAGE DISPENSER
Unplug the beverage dispenser and, once the frost melts, carefully wipe down the
outside or inside of the unit. When dry, plug the unit back in.
MAINTAINING THE UNIT
Empty the drip tray when necessary and clean it with a damp cloth
Occasionally wipe the outside of the beverage dispenser with a damp cloth to ensure
cleanliness
IN THE EVENT OF A POWER FAILURE
In the event of a power failure, do not remove the cover of the beverage dispenser too
frequently to ensure the internal temperature remains the same. A slight and gradual
increase in temperature could have an effect on the temperature of the beverage.
If the ambient temperature is very hot, place the beverage dispenser in a cool
environment.