Danby DDW611WLED Dishwasher User Manual


 
13
Operating Instructions
STARTING A WASHING PROGRAM
You can modify the washing program when the dishwasher just runs for a short
time. Otherwise, the detergent may have already been released, and the appli-
ance may have already drained the wash water. If this is the case, the detergent
dispenser must be refilled.
To change the washing program, press the Start/Reset button to pause the work-
ing program, and then press and hold the program button for at least 3 seconds
before choosing a different program and resuming the wash cycle.
NOTE: If you open the door during washing, the machine will pause. When you
close the door and press the Start/Reset button the washing resumes 10 seconds
after you close the door.
The lights show the state of the dishwasher:
a) All phase lights off-----------------------------------On stand by
b) The display has no blinking-----------------------Being paused
c) The display is blinking------------------------------Running
CHANGING THE
PROGRAM
FORGOT TO ADD A
DISH?
A forgotten dish can be added any time before the detergent cup opens.
1
Press the Start/Reset button to pause the cycle.
2
Open the door a little to stop the washing.
3
After the spray arms stop working, you can open the door completely
4
Add forgotten dishes.
5
Close the door
6
Press the Start/Reset button, the dishwasher will run after 10 seconds.
AT THE END OF THE
WASH CYCLE
When the working cycle has finished, the buzzer will sound for 8 seconds, then
stop. Turn off the appliance using the ON/OFF button, shut off the water supply
and open the door of the dishwasher. Wait a few minutes before unloading the
dishwasher to avoid handling the dishes and utensils while they are still hot and
more susceptible to breakage. They will also dry better.
• Turn off the dishwasher
All the phase lights are off!
1.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
• Open the door carefully
Hot dishes are sensitive to impact. The dishes should therefore be allowed to cool
down around 15 minutes before being removed from the appliance. Open the
dishwasher's door, leave it ajar and wait a few minutes before removing the dish-
es. This way they will be cooler and the drying will be improved.
• Unloading the dishwasher
It is normal that the dishwasher is wet inside.
WARNING
It is dangerous to open the door during operation because the hot water
may scald you.